Blog

Anodized 6061 Aluminum Cabling Turning Parts

When dripping carburizing is used, the carburizing agent is generally methanol (to form carrier gas); kerosene or acetone, ethyl acetate (to form enri

view more

7075 Harden Aluminum Anodized CNC Milling

1. Before starting the furnace, check the equipment according to the pit carburizing furnace operating regulations. 2. Carburize the furnace tank and

view more

Dome Guitar Pot Control Black Rotary Volume Knob With Wrench

Wheel forgings with the same material, the same technical requirements for the carburized layer, and the same heat treatment method after carburizatio

view more

Car Parts Racing Car Shifter Stick Lever Shifter

The wheel forgings should be evenly placed in the basket, and there should be a gap of more than 5mm between the wheel forgings to ensure that the car

view more

CNC Steering Stem Nut Anodized Aluminum Part

The material frame should be placed vertically when it is put into the furnace. The material baskets of each layer should be neat and orderly and ther

view more

Anodized Aluminumcar Wheel Spacer Adapter

After the wheel forgings are put into the furnace, cover the furnace cover tightly to avoid air leakage. In order to prevent explosion accidents of ga

view more

Anodized Aluminium Screw Nut And Bolt

After the actual temperature in the furnace tank has exceeded the spontaneous ignition point of the carburizing agent used, add the carburizing agent

view more

Accessories CNC Aluminum Milling Parts

The mechanical properties of wheel forgings should meet the requirements of room temperature mechanical properties of commonly used steel grades for f

view more

Aluminum Stainless Steel Automotive Adapter Connector

The chemical composition of wheel forgings and the chemical composition of steel for wheel forgings shall be based on the results of sampling analysis

view more

4 Axis 5 Axis Aluminum 7075 Anodizing Base Chassis

When the user requires chemical composition verification and analysis of forgings, it must be in accordance with GB/T222-1984 "Sample sampling me

view more

Bottom Bracket Shell For Bike

The shape and size of the wheel forgings should meet the requirements of the forging drawing. The machining allowances, tolerances and margins specifi

view more

Aluminum Telescopic Pole With Hooks For Opening Roof Window

If there are defects such as cracks, folds, forgings, interlayers, scars, slag inclusions, etc., on the surface of the wheel forgings, the following r

view more