Blog

Aluminum Mass Production CNC Machining Auto Parts

In short, gas is always harmful to the quality of steel ingots and properties of forgings and should be removed as much as possible. Since the widespr

view more

Steel Black Leather Chicago Screw

The magnetic marks on the surface of forgings may be caused by the following reasons: grinding cracks, white spots of materials, quenching cracks, for

view more

OEM Black Angle Aluminum Corner Connector For 20mm Extrusion

Grinding cracks When the contact surface between the grinding wheel and the workpiece is large, the grinding wheel is too blunt, the feed rate is too

view more

No Touch Contact Brass Door Opener Keychain

white spots The white spots are internal cracks caused by the precipitation and accumulation of excessive hydrogen in steel, especially after the cool

view more

Aluminium Window Door Hardware Square Tube Corner Connector

Quenching crack If the steel is overheated, the austenite grows up. The thick-needle martensite produced during quenching will collide with each other

view more

Hardware Fastener Bolt With Internal Thread

Forging crack Inappropriate forging process, such as poor heating and cooling temperature control, incorrect operation, dent and folding of the workpi

view more

Connector Precision CNC Brass Machining Parts

Non-metallic inclusions The magnetic traces of non-metallic inclusions in shaft-shaped and rod-shaped forgings are similar to hair lines, and are gene

view more

CNC Brass Machining Electric Car Truck Parts

Large forgings are mostly subjected to greater stress in the service environment, and require higher comprehensive mechanical properties of the workpi

view more

Milling Bronze CNC Brass Machining Parts

The main influencing factors are: uneven chemical composition and the existence of various metallurgical defects, such as segregation; coarse and unev

view more

CNC Machining Bearing Brass Parts

Therefore, large forgings generally require post-forging heat treatment to improve the internal structure of the forging, eliminate the forging stress

view more

CNC Aluminium Machining Corner Connector Parts

In addition to the recognized factor that the temperature of the horizontal rotary dryer is too high to cause the deformation of the simplified heat e

view more

OEM Steel Quadcopter Drone Parts

There is an error in the processing of the two belts. The inner and outer coaxiality of the two tyres were not controlled as required during the finis

view more