Blog

Stainless Steel 304 U Bend Pipe Welding--Identify pipe bender

There are two types of manual benders: portable and fixed. Can simmer pipes with a nominal diameter of no more than 25mm, with a portable manual pipe

view more

Stainless Steel 304 U Bend Pipe --Multilayer die

Double-layer or multi-layer mold: double-radius or three-radius in one tube. Double-layer or multi-layer composite mold: short straight section.It is

view more

Stainless Steel 304 U Bend Pipe --Composite mold

When designing pipe bending molds, consider double-layer molds or multi-layer molds. At present, Pride's pipe bending equipment supports the desig

view more

Stainless Steel 304 U Bend Pipe --Pipe second mold

For situations where one tube and one model cannot be achieved. For example, the customer's assembly interface space is narrow. The pipeline layou

view more

Stainless Steel 304 U Bend Pipe--pipe value selection

Generally speaking, the minimum bending radius should not be less than 2-2.5 times the outer diameter of the pipe. The shortest straight section shoul

view more

Stainless Steel 304 U Bend Pipe - one pipe, one mold model design

The minimum bending radius depends on the material properties. The bending angle, the allowable amount of thinning on the outside of the tube wall aft

view more

Stainless Steel 304 U Bend Pipe --Bend pipe model selection

For a pipe, no matter how many bends, no matter how the bending angle is (should not be greater than 180. The bending radius is best to be uniform. Si

view more

Stainless Steel 304 U Bend Pipe Welding--Precautions for production

When the lead pipe is heated to make the elbow, no sand is allowed. After hot or cold bending of metal pipes, heat treatment shall be carried out in a

view more

Stainless Steel 304 U Bend Pipe Welding--making skills

When making elbows with seam pipes, the welding seam should avoid the hand (pressing) area. The metal pipe should be cold-bent or hot-bent within the

view more

Stainless Steel 304 U Bend Pipe Welding--manufacturing specification

The bending radius of the elbow shall comply with the requirements of the design documents and the current relevant national standards. When there is

view more

Stainless Steel 304 U Bend Pipe--Process

Radius of curvature: The cold-bent pipe is formed by a number of differential plastic deformations to achieve a circular arc shape. The feed is 300 mm

view more

Stainless Steel 304 U Bend Pipe--Yield Principle

Yield principle: The construction principle of applying a certain force to a predetermined place (steel pipe, outside) of the steel pipe to cause it t

view more