Blog

Stainless Steel 304 U Bend Pipe Welding--raw material inspection

After the raw materials enter the factory, the quality management department inspects the raw materials in accordance with the raw material acceptance

view more

Finished elbow effect-Stainless Steel 304 U Bend Pipe

Pride's special process can simultaneously expand the diameter of the steel pipe blank during the bending process through the mandrel. At the same

view more

Stainless Steel 304 U Bend Pipe--Elbow material selection

The principle of the seamless push elbow is to heat the blank (seamless steel tube) of the seamless elbow by medium frequency induction heating. This

view more

Stainless Steel 304 U Bend Pipe--Elbow processing standard

The general technological process adopts the elbow push process operation instruction book and the tee operation instruction book. According to GB1245

view more

Stainless Steel 304 U Bend Tube--Elbow diameter parameters

According to the normal 1.5DN elbow diameter expansion ratio, the ratio of 1.4-1.5 times is ideal. The processing technology of the small head and the

view more

Expansion and shrinking process function-Stainless Steel 304 U Bend Pipe

The expansion and contraction of steel pipes can not damage the original structure and mechanical properties of the organization. It can also ensure t

view more

Pipe fitting processing-Stainless Steel 304 U Bend Pipe

For the processing of pipe fittings, two processing techniques of expansion and contraction are generally used. This is to use steel pipes as processi

view more

Bend Pipe Reducing-Stainless Steel 304 U Bend Pipe

The three diameters are not equal to each other. The shape of the head is elliptical, hemispherical, and butterfly. In use, the medium and low pressur

view more

Elbow parameters--Stainless Steel 304 U Bend Pipe

1.5DN is called a long radius elbow. IDN is called short radius elbow. There are also places where 2DN and 2.5DN are required. But it does not fall un

view more

Elbow parts--Stainless Steel 304 U Bend Pipe

The elbows are divided into long radius elbows, short radius elbows and reducing elbows. The three links are divided into three links, four links and

view more

Pipe fittings--Stainless Steel 304 U Bend Pipe technical support

As the name suggests, pipe fittings are the parts in the pipeline called pipe fittings. The types of pipe fittings can be divided into elbows, tees, l

view more

Stainless Steel 304 U Bend Pipe Welding--pipe bender operation

During operation, put the simmered pipe in the elbow groove. Then, one end is fixed on the movable baffle. Finally, by pushing the handle, the tube ca

view more