01MayInsulated wires of different materialsRV - PVC insulated single-core cord, the highest use temperature of 65 degrees C, the minimum use temperature of -15 degrees C, operating voltage AC 2
view more
01MayInsulated wire material symbolInsulated wire material symbol R stands for soft copper wire, V stands for PVC insulation, S stands for twisted pair, B represents flat type, And P re
view more
01MayThe model of the insulated wire is also directly related to the useThe model of the insulated wire is also directly related to the use, and the different letters represent not only the different models, but also the d
view more
01MayMost of the wires we use at home are insulated wiresIn addition, in terms of use, insulation wire applications are very wide. Most of the wires we use at home are insulated wires, and there are many lar
view more
01Maymaterials of the wire insulation layerIn China, can be used as a wire non-conductive material sin, plastic, pvc material, silicone rubber, etc. , these materials into the wire insulation l
view more
01Mayelectric shock and other accidents of the wire called insulated wireIn the outer part of the wire is evenly and sealed to wrap a layer of non-conductive materials, such as: resin, plastic, silicone rubber, PVC, etc., T
view more
01MayIncrease the deceleration ratio iIncrease the deceleration ratio i, which will affect the fast forward speed of the machine tool. You need to go back and recheck the fast forward spee
view more
01MayThis method is the simplestThis method is the simplest, but not Economic, not low-carbon, generally not recommended. ②Reduce F, that is, reduce the mass of the moving part under
view more
01MayHow to adjust the torque of the motorcan be ignored. Therefore, the formula can be simplified as T=T negative=(FR/η)/[(i×η1)×1.5]=(FR)/(i×η1×η×1.5). After simplification, it can be seen t
view more
30AprThe acceleration torque T electricity that the motor overcomes its own inerti...The acceleration torque T electricity that the motor overcomes its own inertia is also an order of magnitude away from the negative acceleration torqu
view more
30AprWhy is the loss of the acceleration torque T tooth of the output helical gear...The analysis formula T=T negative+T electricity=(FR/η+T tooth)/[(i×η1)×1.5]+J electricity ɑ electricity.Through the above calculation process, it can
view more
30AprThe mixing and compounding of herbicides can expand the range of weed controlThe mixing and compounding of herbicides can expand the range of weed control, improve the control effect, extend the suitable application period, red
view more












