90 Degree Aluminium Reusable Hose End For Oil Fuel AN6 Swivel Fitting

Product Description

Our Warehouse

• Some regular type materials we always keep in stock

• Clean and big moulds warehouse to keep all customers' moulds orderly

In-house Moulds Fabrication

We promise to design and manufacture all your moulds in house, to ensure moulds quality and safety.

Stamping Workshop

• We have nearly 70 sets stamping machines from small to large. The largest up to 500Ton.

• The moulds and equipments quality effects the stamping products quality. Luckily, we can provide all these with high quality.

CNC Machining Workshop

• We have 3/4/5 axis precision advanced CNC machining centers.

• We have advanced lathe turning machines to make the parts fastly (when put the material into the machines, finally the perfect products come out).

Secondary Operation Workshop

• We create the special equipment for deburring and flattening the parts automatically.

• We have ultrasonic cleaning equipment in house, so that all the parts can be cleaned before packaging.

• We have in house laser printing equipment to do your custom LOGO.

Our Inspection Workshop

We have low and high temperature testing machines, salt spray test chamber, 3D projector and various inspection tools.

Shenzhen pride Industrial Co., Ltd.

E-mail: crush@pride-cnc.com

Whatsapp:+8615629044483

Fax:+86-917-3387002

Add: Block D, Dianlian Science Park, Matian St., Guangming District, Shenzhen 518106, China

Latest News

Rotary compressor cylinder double end face fine grinding

1 Brief introduction of double plane precision grinding process.

The double-plane Tang refers to the processing method of using painting materials and abrasive tools to remove excess material on the cylinder. It is the finishing process, and the characteristics of double-end surface finishing are: (1)

The bending deformation is small, the rigidity is good, and the larger one can be used. 2) The cylinder is prone to thermal deformation and burning. 3) Suitable for cutting cylinders with high precision and simple shapes. And the quality of our Chang Chao is actually due to uneven grinding of the cylinder in the equipment's cutting system. In order to improve the quality of the end face cutting of the cylinder, the following instructions can be used: (1)

Choose a resin-bonded grinding wheel with coarser grains and softer hardness. (2) Shaw time supplies sufficient liquid & (3) Use block grinding wheel to cut 4) Fully repair the sand surface into the inner chain center, make the fiber and the cylinder line connection or adjust the length of the head to a small angle, reduce the sand and The contact of Qijiang River improves the conditions for dispersing smoke.

2 From the perspective of grinding fluid.

During the grinding process, both cutting and scoring and scratching occur between the materials of the grinder. The sharpness of the severe tan, the cutting area can reach 400-1000 ℃, the material will be deformed and burned, the grinding wheel will also be severely ground, and the quality of the grinding may decrease. The influence factors of the cutting liquid are mainly divided into the top product of the cutting liquid itself and the flow state. The quality of the cutting fluid itself is mainly divided into two shadow indicators: the liquid concentration and the sharpening. The concentration of cutting fluid directly reports the state of cooling air and sand. If the concentration is too low, the cooling effect can be achieved. From Lun Liqi to quality, if the concentration is too high, it will cause the liquid to be cut and stick to the shop, which will cause poor mobility. At the same time, if it is too viscous, there will be chips and iron filings. And other impurities. The recommended sharpness is 3-5%. If the cleaning waist of the milling fluid is too low, it means that the milling fluid contains iron filings, grains, etc., which is easy to transport into positioning fixtures and cylinders containing impurities, as well as poor threshing of the grinding wheel, which will affect the quality. It is recommended that the shaving fluid replacement week is less than 10 days.

Hot Tags: 90 degree aluminium reusable hose end for oil fuel an6 swivel fitting, China, manufacturers, suppliers, factory, wholesale, customized, made in China