DIN /SAE Hydraulic Rubber Hose Fittings

Product Description

Chinese Priduce DIN /SAE Hydraulic Rubber Hose Fittings

Quality Control

Our Warehouse

• Some regular type materials we always keep in stock

• Clean and big moulds warehouse to keep all customers' moulds orderly

In-house Moulds Fabrication

We promise to design and manufacture all your moulds in house, to ensure moulds quality and safety.

Stamping Workshop

• We have nearly 70 sets stamping machines from small to large. The largest up to 500Ton.

• The moulds and equipments quality effects the stamping products quality. Luckily, we can provide all these with high quality.

CNC Machining Workshop

• We have 3/4/5 axis precision advanced CNC machining centers.

• We have advanced lathe turning machines to make the parts fastly (when put the material into the machines, finally the perfect products come out).

Secondary Operation Workshop

• We create the special equipment for deburring and flattening the parts automatically.

• We have ultrasonic cleaning equipment in house, so that all the parts can be cleaned before packaging.

• We have in house laser printing equipment to do your custom LOGO.

Our Inspection Workshop

We have low and high temperature testing machines, salt spray test chamber, 3D projector and various inspection tools.

Shenzhen pride Industrial Co., Ltd.

E-mail: crush@pride-cnc.com

Whatsapp:+8615629044483

Fax:+86-917-3387002

Add: Block D, Dianlian Science Park, Matian St., Guangming District, Shenzhen 518106, China

Latest News

When the ocs exhaust gas collection and concentration rotary RTO works, when the exhaust gas concentration reaches 2g/m3, the exhaust gas itself decomposes to generate heat, and the RTO combustion chamber no longer needs natural gas heating. When the exhaust gas concentration reaches 2.59/m3 or more, the excess heat can be supplied to the printing and coating equipment. When the concentration is insufficient, reduce the air intake and exhaust air volume by reducing the air concentration and increase the air volume, so that the hot air inside the drying system is circulated several times to increase the liquidity, and at the same time increase the wind speed of the drying air to ensure the drying speed and solvent residue Not exceeding the standard. The fresh air required by the system is collected in key areas of unorganized gas, and all ovens are in a slightly negative pressure state, and the reasonable arrangement of ground exhaust can effectively reduce the smell of the workshop.

In the hot air system of the printing machine, there is a secondary air return structure. Its original function is to reuse the heat energy of the exhaust gas. On the premise that the residual solvent of the printing material does not exceed the standard, the secondary air return is as large as possible to reduce the heating of the printing machine. cost. And this method just achieved the purpose of reducing wind and increasing concentration. When the air valves of the fresh air pipe, return air pipe and exhaust pipe are adjusted properly, it can produce good energy saving and thickening effect. On this basis, there have been several special methods for reducing wind and increasing concentration. Monochrome group secondary return air LEL concentration detection control method, whole machine return air circulation method (ESO), whole machine return air circulation plus concentration detection control method { Parallel LEL, in addition to the zeolite runner concentration method, the air energy heat pump secondary air return method, and the dry combination oven string air method, these methods are currently installed or used. The effect of wind reduction and concentration increase mainly depends on whether the exhaust gas concentration after wind reduction and concentration increase is between 2~6g/m3, and whether the unorganized gas in the workshop is reduced.

Hot Tags: DIN /SAE Hydraulic Rubber Hose Fittings, China, manufacturers, suppliers, factory, wholesale, customized, made in China