How About The Three Models How Do You Choose The Shaving Machine?

The shaving machine uses a gear-shaped shaving cutter as a tool to refine the gear face that has been machined, a method known as "shaving teeth". The shaving machine according to the principle of helical gear meshing by the tool-driven workpiece (or workpiece-driven tool) free rotation of the cylindrical gear to be refined, on the tooth surface shaved off the silky fine chips, in order to correct the profile and improve the surface finish. So what kind of shaving machine to choose?

CNC shaving machine.

Model: YN4212C1.

This machine tool is a small cylindrical gear heat treatment before the correction of the teeth finishing equipment, can be used for power tools motorcycles, cars, machine tools, cranes, instrumentation, defense industry and other industries tooth-shaped parts batch processing, can effectively improve the tooth accuracy and tooth surface finish, improve transmission stability to reduce transmission noise. The radial shaving performance of this machine, especially suitable for machining interval small step gear, high processing efficiency, stable precision, repair radial shaving tool can shave drum teeth and small taper teeth.

Form: Shaving machine control: NUMERICAL control.

Origin: Domestic largest workpiece diameter: 125mm.

Maximum workpiece module: 2.5mm.

Product name: CNC shaving machine model: YN4212C1.

Maximum workpiece diameter: 125mm maximum module: 2.5mm.

Maximum processing tooth width: 20mm tool frame swing angle: .30 degrees.

Tool aperture: 63.5mm tool swing center to top center distance: 220mm.

Spindle speed range: 20-400r/min Total capacity: 4kVAkw.

Machine net weight: 1.4t form factor (L x W x H): 140 x 158 x 171mm.

The shaving machine.

Model: Y4232CNC1.

Form: Shaving machine control: NUMERICAL control.

Origin: Domestic largest workpiece diameter: 320mm.

Maximum workpiece module: 6mm part: 0.

Name: 320 size shaving machine Y4232 model: Y4232CNC1.

Maximum workpiece diameter: 320mm maximum module: 6mm.

Maximum workpiece length: 700mm tool swing center to top center distance: 115-280mm.

CNC universal shaving machine.

Model: YK4240.

Form: Shaving machine control: NUMERICAL control.

Origin: Domestic largest workpiece diameter: 400mm.

Maximum workpiece module: 8mm.

Product name: CNC universal shaving machine model: YK4240.

Maximum workpiece diameter: 400mm maximum module: 8mm.

Maximum processing tooth width: 50mm tool holder swing angle: . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tool swing center to top center distance: 120-330mm spindle speed range: 40-450r/min.

CNC system: SIEMENS 802D total capacity: 7.5kw.

Machine net weight: 7.5t.

Technical parameters:

1, the main specifications: the maximum workpiece diameter x maximum module of 400x 8 mm. 

2, processing range:

(1) The maximum workpiece diameter is 400 mm.

(2) The maximum module is 8 mm.

3, size specifications:

(1) The shaver can be installed with a maximum diameter of 250 mm.

(2) The maximum width of the shaver can be installed 50 mm.

(3) The maximum axial distance between the two tops is 550 mm.

(4) The distance from the center of the shaver to the center of the workpiece is 120 to 330 mm.

(6) The maximum moving distance of the workbench (X-axis travel) is 170 mm.

(7) The maximum vertical moving distance of the knife holder skateboard (Z-axis travel) 210mm.

(8) The tool holder slide cuts to a maximum moving distance (Y-axis travel) of 40 mm.

(9) The maximum swing angle of the knife holder (A-axis) is 20 degrees.

(11) The distance from the center of the workpiece to the bottom of the bed is 1135 mm.

4, motion parameters:

(1) The shaver spindle speed range is 40 to 450 rpm.

(2) Axial feed speed range (X-axis) 5 to 160 mm/min (no stage)

(3) Radial feed speed range (Z-axis) 0.15 to 600 mm/min (no stage)

(4) Tangent feed speed range (Y-axis) 5 to 120 mm/min (no stage)

(5) Tool holder maximum swing speed (A-axis) 10 degrees / min (no stage)

(6) Minimum increment 0.001.

5, NUMERICAL CONTROL SYSTEM: SIEMENS 802D NUMERICAL CONTROL SYSTEM.

6, the main motor capacity:                                   

(1) Tool spindle motor (B-axis) 7.5KW.

(2) Axial feed AC servo motor (X-axis) 1.6KW.

(3) Radial feed AC servo motor (Z-axis) 1.6KW.                               

(4) Cut-in AC servo motor (Y-axis) 1.6KW.

(5) Knife holder swing AC servo motor (A-axis) 0.75KW.