Why use surface finish charts? Reason nine

Typical results from the body surface

If the customer's requirements differ from the "stretch" surface of the raw material, metal cutting can grind the material to achieve the desired result of the diameter surface of the part (or the body of the part). We usually achieve 8 to 16 μin Ra by grinding, but in some cases we can achieve 2 to 4 μin Ra.

Another benefit when we roll to deburr is that it produces a polishing effect, producing a smoother surface of 8 μin Ra or better. From there, we can use mechanical polishing techniques to reduce the body surface finish to less than 1μin Ra.

If a rougher surface is required, we can use sandblasting or grinding to deliberately create a very rough surface, possibly in excess of 100μin Ra.

Pride processing products in Europe and the United States, Japan and South Korea, the Middle East, Southeast Asia are widely praised.

Please contact us at zhang@pride-cnc.com