Why use surface finish charts? Reason eight

Typical results of end face cutting

Our abrasive cutting method conservatively produces end cuts of 32 or 63 μin Ra or better, depending on the grinding wheel used. (Remember, the smaller the number, the smoother the surface - so "or better" means "or lower". We conservatively say to start with a high Ra value because different metal types play a critical role in what can be achieved.

For milled parts, we typically achieve end-cut surfaces of 16 μin Ra or higher. Our best results were up to 1 μin Ra or smoother when we mechanically polished the parts to finish cutting.

Pride is very good at this job

Pride processing products in Europe and the United States, Japan and South Korea, the Middle East, Southeast Asia are widely praised.

Please contact us at zhang@pride-cnc.com