What should the CNC milling machine processing staff pay attention to?

1. It is strictly forbidden for non-staff to operate the machine in CNC milling machine processing.

2. It is strictly forbidden to touch the tool, the rotating part or the rotating workpiece processed by the CNC milling machine during the processing operation of the CNC milling machine.

3. After using this button to stop in an emergency, you should check again in accordance with the pre-start regulations of the machine tool, but emergency stop is not allowed.

4. In addition to regulations, it is not allowed to use feet instead of hand-operated handles, and it is forbidden to use the guide rail surface of the bicycle lathe, screw rods, polished rods, etc.

5. It is not allowed to use a knife to cut the inner hole under the condition that the inner wall has blisters, shrinkage holes or keyway parts with a triangular scraper.

6. It can be used only after the compressed air or liquid pressure of the hydraulic chuck reaches the specified value after pneumatic.

7. If the length of the front two sides of the bed head is more than 4 times the diameter when turning the slender workpiece, the center frame or the follower should be used for supporting according to the process regulations. When sticking out behind the head of the bed, guards and warning signs should be added.

8. When cutting brittle metals or cutting prone to splashing (including grinding), a protective baffle should be added, and the operator should wear protective glasses to ensure your personal safety.