What Issues Need to Be Noted for the Maintenance of Deep-hole Drills

In the machine tool industry in the continuous development of the situation, in the current view, including deep-hole drilling machine, including a variety of machine tools, have been further developed and applied, we know that the use of its deep-hole drill to be more long-term, it needs to have a certain maintenance work, then in its maintenance work and need to pay attention to what problems?

1. Before driving, should remove the bed dust and iron chips, oil holes, bed surfaces, bearings and other places, should be in accordance with the machine tool instructions, on time refueling lubrication to reduce wear, the oil surface of the gearbox, should pay attention to maintain at the specified height.

2. Put the handles in the deep hole drill bed in the neutral position, and then the spindle speed adjustment to the slowest level, start the machine, when the spindle turn 2 - 3 minutes lubricant is thrown to the various sports parts, gearboxes and bearings have sufficient lubricant, and then the spindle speed to the desired speed for work.

3. When leaving the deep hole drill, you must stop (shut down) the car so as not to be unchecked and accidents.

4. After the work is completed, should remove the chipping chips from the lathe, wipe the rail surface with cotton yarn, and add oil.

The correct order of operation when machining a deep hole drill.

Drilling deep-hole drills is a special machine developed by guns such as rifles and shotguns. High-performance deep hole drilling and processing holes can be opened deep, but also with good processing characteristics. Deep hole drilling and processing of deep holes関 of course, it goes without saying that the network of cooperative companies, a drawing on what kind of demand flexible response.

Deep hole drill.

1. The correct switcher order: after the power supply is switched on, we have to wait for the system to start the screen completely after the start of the bed, and then eliminate the alarm start-up head bed;

2. Before manually moving the machine tool to the feed rate to a very low gear, first point the machine, the direction is correct and then progress the multiplier. Operating machine tools to be very careful, to do the eye to prevent spin wrong, press the wrong button, machine tool movement process to pay attention to see whether it will collide with the workpiece or fixture, on the verge of workpiece to drop the feed rate.

3. Before moving the shafts after the machine is started, it is very necessary to inspect whether there are obstacles to interfere with the movement of the machine, whether there are missing tools or other items in the working area, if normal to carry out back reference point operation.

4. Do not wear gloves to operate the machine tool, the hands have oil must not operate the machine tool panel.