What are the material requirements for precision parts processing

Fine mechanical parts processing Fine mechanical parts processing, not all data can stop fine processing, some of the materials are too hard, and the hardness of the processing parts can be broken, so these materials are not suitable for fine Machined, unless the machine is made of special materials, or laser cut. So what are the data requests for fine part processing? Let's understand it together.

The information about the processing of fine mechanical parts is divided into two categories, metallic materials and non-metallic materials. Regarding metal data, the hardness is higher than stainless steel, followed by cast iron, followed by copper, and finally aluminum. The processing of ceramics and plastics is attributed to the processing of non-metallic materials.

The first is the request for the hardness of the data. For some places, the higher the hardness, the better. It is only limited to the hardness request of the processing machine. The processed data cannot be too hard. It is assumed that it is harder than the machine. Moderate softness and hardness, at least one level lower than the hardness of the machine parts, but also depends on the function of the processed devices, and the reasonable selection of materials for the machine parts.

In short, there are still some requests for materials in fine mechanical processing. Not all materials are suitable for processing. For example, if the data is too soft or too hard, the former is not necessary for processing, and the latter is not.