If you want to automate parts processing without leaking shortcomings, how do you do it well?

    At present, with the development of industry, the demand for non-standard automation parts and equipment is increasing; non-standard automation equipment has now become an important auxiliary equipment in many industries. When we need non-standard automation equipment, then non-standard automation equipment design and manufacture What are the steps? Non-standard automation equipment is increasingly used in modern science and technology, industrial development and other industries. With the formation of industrial automation, more and more companies have to replace the previous mode of relying on human operations to allow semi-automatic or fully automatic machines to participate in production. So let's ask the question? What are the advantages of non-standard automation equipment in production? What influence and positive effect can these advantages bring to production and life and these aspects? How are these advantages reflected in non-standard automation equipment? Now, let me introduce to you what are the advantages of non-standard automation equipment.

  1. Shortcomings of the power supply

　This shortcoming is a static shortcoming. Most of this shortcoming appears because the power line may be an open circuit, the wrong connection may be caused by poor contact, of course, it may also be because the input voltage of the device or the circuit board component exceeds the allowable error plan. The output voltage caused by the circuit shortcomings of the power component itself exceeds the allowable error plan.

　2, the shortcomings of passive equipment

　This situation is mainly due to the open circuit of the capacitor, the open circuit caused by the loosening of the resistor end cap, and the change of the resistance value. If the resistance value is changed, the logic value may be confused. If the capacitance value is changed, it may be accompanied by poor decoupling, changes in the oscillator frequency, and the failure of equipment such as motors.

　3, poor power supply decoupling

　This kind of problem is generally that the disturbing waveform and the normal waveform are superimposed. The filter capacitors with relatively large capacity and ceramic capacitors with excellent high frequency functions can be used to block these disturbances.

In addition to the above shortcomings, there are also software design shortcomings, equipment design shortcomings, and poor contact. It is difficult to prevent the shortcomings of non-standard automation equipment, but we must find out the cause of the problem and find out the method for the cause. Improvements or precautions, the shortcomings of non-standard automation equipment in the running process will become less and less.