Classification of Ceramic Bearing Grades

Deep groove ball bearings

(Technical grade: P4, P5, P6, P0) deep trench ball bearings, the most representative rolling bearings, a wide range of uses, can withstand radial load and two-way axial load. Suitable for high-speed rotation and requires low noise, low vibration in the case or steel bearingcannot be applied to high temperature, high cold, corrosion, magnetic field, non-insulating and other fields.

Mindball bearings

The outer ring raceway of the center-control ball bearing is spherical and automatically adjusts, which can supplement the error caused by different heartandness and shaft deflection. Used to produce different heart or shaft flexing parts of the shaft and shell and the adjustment parts required by high temperature, low cold, corrosion, magnetic field non-insulation, etc. Note: The tilt must not exceed 3 degrees.

Single-row corner contact ball bearings

(Technical grade: P4, P5, P6, P0) angle contact bearings are suitable for high-speed and high-precision rotation, in high temperature, magnetic field, water, etc. do not affect its accuracy, and can withstand synthetic load. The standard contact angle is 15 degrees, 30 degrees and 40 degrees, the greater the axial load capacity of the contact angle, the smaller the contact angle bearing can withstand radial load and one-way axial load. Generally take the installation in pairs. Please pay attention to the purchase.

One-way thrust ball bearings

A one-way thrust ball bearing consists of a washer-shaped sleeve with a ball rolling track and a cage that assembles the ball. It can withstand axial loads, but not radial loads.