Stainless Steel Washer For Automobile Parts
Description
Technical Parameters
| Quick Detail |
CNC Machining or Not: | CNC Machining |
Type: | Drilling, Laser Machining, Milling, Rapid Prototyping |
| Material Capabilities: | Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys |
| Micro Machining or Not: | Not Micro Machining |
| Place of Origin: | Guangdong, China |
| Drawing Format: | .pdf/.dwg/.igs./.stp/x_t. etc |
Product Scope: | Custom spare parts,CNC ptototype,Mobilephone case,hardware accessories |
| Surface Treatment: | Zinc plating,Anodization,Powder,Passivation,Brushing & ploshing etc. |
| Services: | CNC machining, Milling, Turning, Grinding etc, and assembly |
| QC System: | 100% inspection before shipment, Third Party inspection available |
| Lead time: | 3-5 workdays for samples, 10-20 days for bulk order |
| Trade Terms: | EXW, FOB |
Shipment Terms: | express,air freight,sea freight |
| Supply Ability: | 10000 Piece/Pieces per Month cnc machining automobile parts manufacturer |
| Packaging Details: | 1 PC per PE Foam for standard packing,or depanding on your requset for cnc machining automobile parts manufacturer |
| Port | FOB Shenzhen |
| Product Show |
| Other Products |
| Contact Us |
Block D, Dianlian Science Park, Matian St., Guangming District, Shenzhen 518106, China
+8613477665385
13477665385
| Our Equipment |
| Latest News |
When flexible graphite materials are used in oxidizing media, the maximum temperature of use should not exceed 450 degrees C.
The common pressure is less than or equal to 1.6MPa flanges, the use of winding gaskets, metal clad gaskets and other semi-metallic pads or metal ring pads, should be selected with neck to weld flanges and other rigid larger flange type (very important).
In the selection of gasket size, should pay attention to ensure that the non-metallic flat gasket inner diameter or winding gasket inner ring inner diameter shall not be lower than the flange inner diameter, such as the use of the upper requirements gasket (or inner ring) internal diameter and flange internal diameter in peacetime, the gasket manufacturer should be provided with the corresponding flange internal diameter as the gasket inner diameter, but should ensure that the gasket adequate pressure width.
Spacers with good rebounding properties, such as wave-tooth composite pads or winding gaskets (with inner and outer rings) should be used in situations where temperature and pressure vary or where vibration situating or shock occurs.
Asbestos rubber plate gaskets: it is recommended to generally only apply to temperature, pressure is not high non-essential equipment occasions, asbestos rubber as a gasket should be considered comprehensively, carefully selected. Asbestos gaskets should not be used in extreme or highly hazardous media and high vacuum sealing applications. The thickness of the asbestos gasket for pipes is generally 1.5 to 3mm, thin gaskets use high pressure, but the need to seal pressure is large, the elasticity of the thick gasket is better than the thin gasket, it is easier to seal, the gasket than pressure value is also lower, but the thickness of more than 3mm, the leakage rate is not much change, and the pressure is highe-easier to extrusion.
Hot Tags: stainless steel washer for automobile parts, China, manufacturers, suppliers, factory, wholesale, customized, made in China
Send Inquiry
You Might Also Like
