Delrin PC PEEK ABS POM Plastic Milling Machining Turning Parts

Our Warehouse

• Some regular type materials we always keep in stock

• Clean and big moulds warehouse to keep all customers' moulds orderly

In-house Moulds Fabrication

We promise to design and manufacture all your moulds in house, to ensure moulds quality and safety.

Stamping Workshop

• We have nearly 70 sets stamping machines from small to large. The largest up to 500Ton.

• The moulds and equipments quality effects the stamping products quality. Luckily, we can provide all these with high quality.

CNC Machining Workshop

• We have 3/4/5 axis precision advanced CNC machining centers.

• We have advanced lathe turning machines to make the parts fastly (when put the material into the machines, finally the perfect products come out).

Secondary Operation Workshop

• We create the special equipment for deburring and flattening the parts automatically.

• We have ultrasonic cleaning equipment in house, so that all the parts can be cleaned before packaging.

• We have in house laser printing equipment to do your custom LOGO.

Our Inspection Workshop

We have low and high temperature testing machines, salt spray test chamber, 3D projector and various inspection tools.

Shenzhen pride Industrial Co., Ltd.

E-mail: crush@pride-cnc.com

Whatsapp:+8615629044483

Fax:+86-917-3387002

Add: Block D, Dianlian Science Park, Matian St., Guangming District, Shenzhen 518106, China

Latest News

HDPE lined pipe production technology

The PE inner lining is actually PE (polyethylene) with a very thin wall thickness. The general SDR value (diameter-thickness ratio: outer diameter/thickness) is 50~80. It is the main material for trenchless repair. The construction unit will After the lining pipe material is penetrated into the original Japanese snow road through the "equal diameter" or "U" process, the PE lining bending material is rounded, and the PE inner tree pipe is tightly attached to the original steel pipe, Cement or petroleum roads, PE lined with snow material play a role in preventing and dense, steel plays a role in bearing pressure, the pipes that were almost unusable can be excavated and repaired through this process, and they can be restored to use. The perfect combination of composite, not only rapid construction, greatly reduces the total installation cost, the current project has a broad market map, both social and economic benefits, but the production technology of PE lined pipes is more difficult, ordinary thermal insulation The product quality of the pipe production line cannot meet the quality requirements, so you can only use the PE pipe extrusion line to carry out certain mold transformations, while improving the production technology level, and summing up experience, so as to greatly reduce the waste rate and reduce the production cost on the basis of ensuring product quality. At present, there are not few domestic manufacturers producing HDPE police materials for lining repair. Now, we will summarize the main problems and solutions encountered in the production of PE lining materials and the main technical problems in the production of HDPE inner-cun animal materials. Including problems such as large outer diameter control, difficult wall thickness control, unqualified pipe surface, traction slip, unqualified pipe fracture productivity, etc. The above problems are analyzed and resolved as follows:

1Outer diameter control HDPE lining pipe has a very high requirement on the outer diameter. If the outer diameter of the pipe is too large, the PE lining cannot be opened after the inner product of the pipe or cement pipe is worn. There are wrinkles and cannot be tightly attached to the original snow. Inside the road: If the outer diameter of the PE inner material is too small, after the original steel pipe or cement pipe is worn, there will be a gap between the PE lining and the steel pipe or cement sales. On the one hand, it cannot be close to the original sales compliance, and it will cause the PE lining The pressure of the pipe alone will eventually cause the PE material to rupture and cause the project to fail. However, because the PE lining Cao material is too thick, it is extremely difficult to control the moisture and vacuum during the production process, and it is difficult to control the outer diameter. The prevention and solution measures are as follows:

(1) The vacuum rice water temperature controller of PE extrusion production line must be sensitive and usable. The inlet and drain system valves during the production process cannot be adjusted at will, and the temperature fluctuation of the cooling water cannot exceed ±2°C.

(2) All spray water must be of normal quality, and there must be no spray culture or no water. When preparing for production, check the full water.

Hot Tags: delrin pc peek abs pom plastic milling machining turning parts, China, manufacturers, suppliers, factory, wholesale, customized, made in China