Aluminum Front Panel Machined By Cnc Milling
Description
Technical Parameters
|
Samples |
Available within one week, sample cost can return |
|
MOQ |
Accept small order,Feel free to contact us for further inquiry. |
|
Trade assurance |
100% ensure quality and ensure delivery time |
|
Delivery time |
15-20days |
Capacity
|
CNC Turning |
φ0.5 - φ300 * 500 mm |
+/-0.01 mm |
|
CNC Milling |
510 * 1020 * 500 mm(max) |
+/-0.01 mm |
|
Drawing Format |
IGS,STP,DXF,DWG , PDF |
|
|
Test Equipment |
measurement instrument, Projector, CMM, Altimeter, Micrometer, Thread Gages, Calipers, Pin Gauge etc. |
|
Material Available
|
Stainless Steel |
SS201,SS301, SS303, SS304, SS316, SS416 etc. |
|
Steel |
mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc. |
|
Brass |
HPb63, HPb62, HPb61, HPb59, H59, H68, H80, H90 etc. |
|
Aluminum |
AL6061, Al6063, AL6082, AL7075, etc. |
|
Plastic |
ABS, PC, PE, POM, , Nylon, , PP, etc. |
Surface finish:
|
Aluminum parts |
Stainless Steel parts |
Steel |
Plastic |
|
Clear Anodized |
Polishing |
Zinc plating |
Plating |
|
Color Anodized |
Passivating |
Oxide black |
Painting |
|
Sandblast Anodized |
Sandblasting |
Nickel plating |
polishing |
|
Chemical Film |
Laser engraving |
Chrome plating |
Laser engraving |
|
Brushing |
Carburized |
||
|
Polishing |
Hot treatment |
||
|
Chroming |
Powder Coated |
News
Characteristics of high-speed milling tools for machining precision parts
High-speed milling used in the precision parts processing industry refers to a cutting direction that uses cemented carbide tools to achieve the full play of the cutting performance of the tool and the use of much higher cutting speeds than high-speed steel tools to improve production efficiency. At present, high-speed milling has been widely used in end milling planes. Commonly used high-speed milling plane cutters have the following types:
(1) Positive rake angle cutter: The positive rake angle cutter has the advantages of sharp tooth edge and low cutting force, but because the cutting resistance is concentrated on the tip of the cutter, the brittle carbide is very easy to break, so the positive The rake angle cutter is suitable for milling materials with lower strength and less vibration in the processing of precision parts.
(2) Negative rake angle milling cutter: when the negative rake angle cutter is cutting, the cutting edge is not cut first, but the rake face first contacts the workpiece to push the metal layer, and the cutting resistance does not act on the cutting edge, but on the Leave the rake face of the tool tip to improve the vibration resistance and strength of the tool. At the same time, the negative rake angle will increase the deformation of sawing chips, increase the cutting heat and increase the temperature of the cutting layer, soften the material at the processing place, which is conducive to cutting and improving the surface quality.
(3) Positive rake angle with negative chamfering milling cutter: the force when the positive rake angle with negative chamfering cutter is cutting. The purpose of negative chamfering is to improve the force of positive rake angle cutters, so that positive rake angle cutters can maintain the advantages of light cutting and sufficient strength. Therefore, in the processing of precision parts, when the machining margin is large However, when the rigidity of the machine tool, fixture and workpiece is insufficient, it is advantageous to use this form of tool.
Hot Tags: aluminum front panel machined by cnc milling, China, manufacturers, suppliers, factory, wholesale, customized, made in China
Send Inquiry
