ADC12 Aluminum High Pressure Die Casting Components Drawing
ADC12 Aluminum High Pressure Die Casting Components Drawing
ADC12 Aluminum High Pressure Die Casting Components Drawing
ADC12 Aluminum High Pressure Die Casting Components Drawing
ADC12 Aluminum High Pressure Die Casting Components Drawing
ADC12 Aluminum High Pressure Die Casting Components Drawing
ADC12 Aluminum High Pressure Die Casting Components Drawing
Description
Technical Parameters
| Quick Detail |
CNC Machining or Not: | CNC Machining |
Type: | Drilling, Laser Machining, Milling, Rapid Prototyping |
| Material Capabilities: | Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys |
| Micro Machining or Not: | Not Micro Machining |
| Place of Origin: | Guangdong, China |
| Drawing Format: | .pdf/.dwg/.igs./.stp/x_t. etc |
Product Scope: | Custom spare parts,CNC ptototype,Mobilephone case,hardware accessories |
| Surface Treatment: | Zinc plating,Anodization,Powder,Passivation,Brushing & ploshing etc. |
| Services: | CNC machining, Milling, Turning, Grinding etc, and assembly |
| QC System: | 100% inspection before shipment, Third Party inspection available |
| Lead time: | 3-5 workdays for samples, 10-20 days for bulk order |
| Trade Terms: | EXW, FOB |
Shipment Terms: | express,air freight,sea freight |
| Supply Ability: | 10000 Piece/Pieces per Month cnc machining automobile parts manufacturer |
| Packaging Details: | 1 PC per PE Foam for standard packing,or depanding on your requset for cnc machining automobile parts manufacturer |
| Port | FOB Shenzhen |
| Product Show |
| Other Products |
| Contact Us |
Block D, Dianlian Science Park, Matian St., Guangming District, Shenzhen 518106, China
+8613477665385
13477665385
| Our Equipment |
| Latest News |
Bolt Assembly
1. The wire holes of bolts, nuts or joints shall be visually inspected before assembly, and shall be free of bumps or scratches, in accordance with the standards referenced in the drawings or this specification.
2. Do not touch the threaded part of the bolt during assembly.
3. The head of the bolt and the washer of the nut face should be in even contact with the tight part plane, should not be tilted, nor allow the hammer to make two planes contact, the screw should be non-bending deformation.
4. The connecting parts should be evenly pressed, close to each other, and securely connected.
5. The use of inappropriate wrenches is strictly prohibited when bolts and nuts are tightened.
6. Bolts, screws should be assembled by hand more than 2 to 3 pitches, and then with a wrench or power tool tightening.
7. When bolts and nuts are assembled, pay attention to protect the paint, coating and bolts and nuts head of the jointed parts, and cannot be damaged.
8. After the nut is tightened, the head of the bolt should reveal the nut end face 2 to 3 pitches, the nut and washer are facing the connecting body on the opposite side (the side of the nut marked with the word is positive, the washer sleek side is the front).
9. The bolt is tightened and the paint mark is marked, and the marking bit is usually used with a red paint point at the contact point of the bolt and the nut. Colors can vary depending on where they are used, but the colors must be clearly distinguished.
Hot Tags: adc12 aluminum high pressure die casting components drawing, China, manufacturers, suppliers, factory, wholesale, customized, made in China
Send Inquiry
