Wrench Video Vacuum Temperature
Aug 11, 2022
Leave a message
3. Partially heat the mold or use thermal insulation material to locally keep it warm. 4. A copper block is placed at the hot joint to chill the part. 5. Design heat sinks on the mold, or accelerate the local cooling speed through water, or spray water or spray outside the mold. 6. Use detachable chilling blocks and place them in the cavity in turn to avoid insufficient cooling of the chilling block itself during continuous production.
Contact Us：
Email: zhang@pride-cnc.com
Tel: +86-755-23699351
Mob: +8618666663894