What Conditions Need To Be Met For Computer Gong Processing Operations?

The correct computer gong processing operation method can help the mold manufacturing company to greatly improve production efficiency, so what problems should be paid attention to during specific operations? An operation technician with many years of experience has given some suggestions, and needs to meet the following requirements during computer gong processing operations:

1. Environmental requirements.

The computer gong processing center needs to be far away from the vibration source, avoid direct sunlight and heat radiation, and ensure that the air is dry and free from the influence of airflow. Otherwise, it will directly affect the accuracy and stability of the mold processing, will make poor contact with electronic components, and affect the final processing quality.

2. Power requirements.

Generally, the computer gong processing center should have an independent operation workshop. The ambient temperature, operating conditions and various electromechanical equipment will cause the power grid to fluctuate greatly. Therefore, the environment where the machining center is placed has strict control on the power supply voltage, otherwise it will affect the normal operation of the CNC system of the machining center.

3. Temperature conditions.

The ambient temperature of the computer gong processing center needs to be kept at about 30°C, because excessively high temperature and humidity will cause the life of the control system components to decrease and lead to increased defects. Moreover, the increased dust will cause adhesion on the integrated circuit board and cause a short circuit, causing problems in the machining center and affecting production efficiency.

4. The operator must follow the instructions.

Operate the machining center according to the instructions, remind everyone that when using the computer gong for processing, you must not arbitrarily change the parameters set in the control system, because these parameters are directly related to the dynamic characteristics of the components of the machining center, only the compensation parameter values can be based on the actual The situation is adjusted.

Although there are many years of rich experience in computer gong processing, there is no guarantee that it will not go wrong. Everyone has a sloppy time, but remember that you must not do these things when operating the processing center:

1. Do not change the overall system parameter values or other settings of the machining center. If changes must be made, records should be made in advance so that later problems can be restored to the original adjusted values in time.

2. Do not touch the switch with wet hands. Touching the switch with wet hands will cause leakage of electricity and be prone to electric shock. Make sure to press the switch correctly to avoid the danger of wrong connection. The emergency stop button must be remembered.

3. Do not place obstacles on or around computer gong processing equipment. The only way to improve production efficiency and avoid danger is to ensure that the working space is large enough; the working floor is clean and dry, and do not move or damage the safety warning signs at will.

4. Technicians who are not trained in safe operation cannot operate, and two people are not allowed to work together. If two or more people need to work together, they must do a good job of coordination.

Introduced so many hopes that during the actual operation, you can keep in mind that the correct operation method can not only ensure the normal use of the equipment, but more importantly, can ensure the safety of personnel, and the taboos in the process must not be triggered, which is also to yourself Responsible practices.