What Are The Methods For Rust Removal Of CNC Parts?

General iron products will have rust. This is basic common sense. Many people know that CNC parts processing or accessories as bearings, etc., due to inventory conditions or improper rust prevention, will easily cause The condition of rust can not be handled by mechanical methods. Chemical pickling will damage the accuracy of the parts. So what methods can be used to remove rust? The following editors will tell you about the experience and methods I have summarized:

No damage to the workpiece, no change in parts, no corrosion. Rework or repair high precision parts. Due to the improper inventory or transportation, the surface of the part will generate rust. Using Collin-306 can perfectly remove the rust and ensure the original accuracy.

Soaking and cleaning process:

1 Add a professional cleaning stock solution to the tank (a plastic or stainless steel tank is recommended to reduce the penetration of iron ions into the stock solution and reduce the service life);

2 Use an electric heater to heat to 40-50 degrees and keep it. Normal temperature may just need to extend the time;

3 Soak the hardware processing parts into the tank;

Wipe cleaning process:

1 Wipe repeatedly with a rag. This method is suitable for cleaning and rust removal of large equipment or workpieces;

2 After wiping, dry with hot air or apply anti-rust oil after natural drying.