Recover Golf Fly Tray Handle Assistant

The relationship between the feed conditions and the back wear of the tool occurs in a very small range. However, the feed rate is large, the cutting temperature rises, and the back wear is large. It has less influence on the tool than the cutting speed. The effect of the depth of cut on the tool has no cutting speed. However, when cutting with a small depth of cut, the material to be cut will produce a hardened layer, which will also affect the life of the tool. Elements of cutting conditions Cutting speed Feed rate and depth of cut directly cause damage to the tool. With the cutting speed If the cutting speed increases, the temperature of the tool tip will rise, which will cause mechanical, chemical and thermal wear. If the cutting speed is increased by 20%, the tool life will be reduced by 1

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894