Precision Stamping Metal Processing Processing Mold, Four-axis Linkage Vertical Machining Center.

When the automotive machinery parts processing customer market was sluggish, the ambulance segment showed strong growth, and the procurement demand in many provinces had a blowout this spring. For our precision machining manufacturers, we really did not expect that this wave of new coronary pneumonia would change the pattern of automotive downstream customers. In fact, we simply do not want to see this situation. The auto machinery parts processing plant has been in the doldrums for several years along with the automobile consumer market, and many orders are not received. The procurement needs of downstream customers are all focused on the end consumer market. If the sales of automobiles soar, our upstream mechanical processing manufacturers will be able to Benefit, but under the big cycle of the market, we do not hold much hope.

      Friends from all walks of life are welcome to inquire Li Sheng at any time, and all the staff of Jianfeng Gold Factory welcome you to offer business emails from time to time. Customer first, quality first.

      With the development of the times, sheet metal processing involves more and more applications. Therefore, the materials for manufacturing sheet metal processing products are different due to the different functions of products such as chassis and cabinets. Iron, copper, galvanized sheets, stainless steel, and aluminum profiles are all sheet metal. processed material. The specific material application aspects are as follows.

      Precision stainless steel parts processing A. The coordinates are set to zero at the bottom, but in reality, the top is 0; B. The safety height is too low, so that the tool cannot be completely lifted out of the workpiece; C. The rough allowance for the first opening is less than that of the previous knife ;D. After the program is written, the path of the program should be analyzed and checked. A. The number of unilateral collisions is written as side points; B. The clamping distance of the vise or the protruding distance of the workpiece is marked incorrectly; C. When the remarks on the extension length of the tool are unknown or wrong, it will lead to the collision of the tool; D. The program sheet should be as detailed as possible; E .When the program list is changed, the old program list should be destroyed by the principle of replacing the old with the new one. A. The tool setting data input does not consider the tool setting bar; B. The tool is installed too short; C. The tool measurement should use a scientific method, and use a more accurate instrument as much as possible; D. The length of the tool is longer than the actual depth by 2 ~5mm

contact：crush@pride-cnc.com

Fax:+86-917-338700