Points For Attention In The Machining Process Of Mechanical Parts

In the processing of mechanical parts, in order to ensure the accuracy of the processing, the following points need to be paid attention to in order to avoid the influence of deformation on the accuracy of T plus:

(1) In the design stage of mechanical parts, it is necessary to carry out reasonable design. It is necessary to fully consider improving the strength of mechanical parts. At the same time, it is also necessary to pay attention to analyze whether the rigidity of the parts will change during the processing. Or the deformation is large, etc. At the same time, pay attention to the reasonable layout of the parts during processing so that the force of the inspected parts is uniform and the deformation is reduced. The parts selected by the processing heat should also be injected. The deformation improves the processing quality of mechanical parts.

(2) Strictly controlling the deformation during processing requires analyzing the influencing factors of deformation easily caused by processing and adopting a reasonable T sequence to eliminate internal stress. At the same time, it is necessary to ensure the rationality of the process benchmarks in the process of adding one to the mechanical parts, and effectively reduce and avoid the machining errors caused by the different benchmarks in the machining process.

(3) In the process of processing mechanical parts, for some more complex or important parts, after finishing the processing of dry mechanical parts, the first task is to perform sub-artificial aging treatment or natural aging treatment , Thus effectively reducing the stress of mechanical parts after processing and the deformation of mechanical parts caused by stress.