Introduction To Process Characteristics Of Automation Equipment Parts

1. The stamping and drawing die can process parts with a large size range and more complex shapes, such as stopwatches for watches and clocks, sidecars and cover parts for automobiles, and the cold deformation and hardening effect of materials during stamping. Both strength and stiffness are high.

2.During stamping, the die guarantees the size and shape accuracy of the stamping part, and generally does not damage the surface quality of the stamping part, and the life of the die is generally long. Therefore, the stamping quality is stable, the interchangeability is good, feature.

3. Generally, there is no chipping and scrap generation in stamping, less material consumption, and no other heating equipment is needed, so it is a material-saving and energy-saving processing method, and the cost of stamping parts is low.

4. The production efficiency of stamping and drawing die processing is high, and the operation is convenient, and it is easy to realize mechanization and automation. This is because stamping relies on the die and stamping equipment to complete the process. The stroke of the ordinary press can reach dozens of times per minute. , High-speed pressure can reach hundreds or even thousands of times per minute, and a punching part may be obtained each time the punching stroke.