How To Properly Use And Maintain CNC Deep Hole Drill?

1. Love THE CNC deep hole drill, keep the numerical control deep hole drill and accessories look clean and clean, clean and hygienic.

2. Tools, tools, tooling fixtures are arranged neatly.

3. The safety protection devices such as the operating room door switch and the anti-collision switch of the CNC deep-hole drilling machine should be put into use normally and shall not be removed at will.

4. Before switching on the power switch, check whether the output voltage of the regulator is 380V, whether the three-phase is balanced, if there is an abnormal ity, must not turn on the machine power supply.

5. The heating procedure needs to be run before drilling holes every day. If necessary, the full travel movement machine shafts 3-5 times, in order to lubricate the rails.

6. Every day to check the oil level of lubricants, to do timely replenishment, with ISO68 rail lubricants.

7. Go to work every day to see if there is any oil leak on the ground.

8. Check the pressure of the hydraulic station once a week if it is normal and the pressure is 2MPA.

9. Check the cooling oil tank level once a week, whether the filter paper is sufficient, pay attention to supplement.

10. Clean the motor back cover, electric cabinet air conditioner, chiller protection network dust every two months.

11. Regularly clean the cooling oil back to the tank precipitation impurities, pay attention to observe the return pump outlet oil pressure.

12. Regularly apply oil to the machine tool shield to prevent injury from embroidery and excessive friction.

13. At least half a year to do a large number of control deep hole drill ingres maintenance, including check whether the rail is wear, motor sound is abnormal, CNC deep hole drilling bed limit protection and anti-collision switch function is normal, whether the cable of moving part is wear, whether there is dust and other anomalies in the main electrical cabinet, whether the external control circuit is completely normal (such as oil level switch, oil way control function), whether the oil connection is loose, whether the balance chain is loose, etc. Wipe the guide must not use a wool-down (head) cotton yarn.