Frisbee Alloy Extendable Wand Tool Kit Frisby Metal Collapsible Wand Kit Assistant

There is a spindle head on the lower end of the spindle box facing the worktable, and a servo motor on the upper end of the spindle box. The spindle head is driven by the servo motor to rotate, and then the parts are processed. The positioning state of the workpiece is prolonged, the production efficiency is low, and the labor intensity of the workers is increased; some use the shaft linkage machining center machine tool, which consists of the base column table, the rotary table, the lifting screw headstock, and the parts used to control the CNC machine tools. It is composed of a CNC unit for work. There is a worktable on the base, a column at the end, a lead screw for driving the horizontal sliding of the column on the base, and a rotary table on the upper part of the worktable, which can realize the rotation of the workpiece along the Z axis ±360 degrees. °, There is a spindle box on the column, and the spindle box can be driven up and down along the guide rail on the column by the lead screw on the column. , in order to process multiple surfaces of the workpiece, the disadvantage is that the position of the spindle rotary body needs to be changed to process multiple surfaces of the workpiece one by one, the processing is long, and the production efficiency is low; another is to use a multi-milling head machining center machine tool to process multiple surfaces at the same time. face, and the use of exchange table device to process the workpiece

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894