Four Tips To Improve The Processing Efficiency Of Non-standard Precision Mechanical Parts

In the process of non-standard precision mechanical parts processing and production in large machinery processing plants, although there are many small tricks that are inconspicuous, if you can know and master these small tricks, you will be more efficient with less effort! Here we introduce a few common tips in the processing of non-standard precision mechanical parts for everyone to understand:

Tip one:

Non-standard precision mechanical parts processing. Disassemble the vise jaws and process two M4 threaded holes. Align two 1.5mm thick steel plates with the jaws, rivet hard brass plates 0.8mm thick with aluminum rivets, and fix with M4 countersunk screws Onto the jaws to form a durable soft jaw. This can protect precision machinery parts from being pinched.

Tip two:Common tips for processing non-standard precision mechanical parts

It is inconvenient to use magnets to suck small precision mechanical parts. An iron plate can be sucked under the magnet. It can not only absorb many small precision mechanical parts, but also pull the iron plate apart. Small precision mechanical parts will automatically fall into the collection box, which is very practical.

Tip three:Horizontal CNC machining

When the pulley drive encounters slipping between the pulley and the axle, a series of nests can be formed on the axle with a ￠ 15-18mm dimple drill bit, which can form an adsorption force and prevent slippage.

Tip four:Common tips for processing non-standard precision mechanical parts

The workpiece is usually positioned first and then clamped, but for some workpieces, the clamping will cause the workpiece to deform. Therefore, for such a workpiece, we must first clamp and then position it, find 6 positioning points, and find the degree of freedom that limits it.

Large machinery processing plants attach great importance to the quality and efficiency of non-standard precision mechanical parts processing. If you can improve production efficiency more efficiently without expensive human and financial resources, these small skills are also highly recommended of.