CNC Turning Mechanical Machining

The main components of the crankshaft connecting rod boring machine are shown in Figure 2. The mechanical CNC machining process of the connecting rod boring machine mainly realizes the cnc machining of the pin hole profile through the relative radial swing of the boring tool installed on the main shaft, and cooperates with each other. , so as to achieve the above. The main shaft is composed of two parts, an outer shaft and an eccentric inner shaft, and the boring tool of the installation tool is installed on the eccentric main shaft. When the spindle motor rotates the spindle, the boring tool will be selected synchronously with the spindle to generate the rotation radius, and the tool will realize cnc machining of straight holes. When the eccentric inner shaft rotates relative to the outer shaft, the optional radius of the tool has a rising and falling radius swing relative to the center of the main shaft. The radius swing is controlled by the CNC system of the lathe to realize CNC machining of various shapes of pin holes.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894