CNC Stainless Steel Turning

In the machining process of the machining factory, the clamping method of the parts processed on the CNC machine tool should also reasonably select the positioning datum and clamping scheme. In addition to the above two principles, it should also be considered to complete the processing of all curved surfaces in the secondary positioning and clamping process as much as possible. Therefore, a positioning method that is convenient for processing all curved surfaces should be selected. When the workpiece is clamped for the first time, the machining of all surfaces of the workpiece should be completed; when the workpiece is determined to be placed on the worktable, the coordination of each station during the machining process, the influence of tool length and stiffness on the machining quality should be considered. The fixtures used in the control processing should be assembled with general-purpose components as much as possible, and the fixtures can be adjusted to process precision parts manufacturers to shorten the production preparation period. When the machining factory arranges the processing program, the basic principles of the machining factory must be followed, including "punch holes first, then rough and fine" and so on.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894