CNC Aluminum Turning Parts For Car

The gold parts processing manufacturer tells you that this is a processing method of a golden angle screw. It consists of a cold forging die and a round bar wire. The wire is expanded in the round melon cold forging die 1 to form a round melon with an inclined surface and a natural R angle, and then the cold forging die 2 is used to extrude the inclined surface of the round melon of the die 1, and the material is pressed to one of the cold forging die 2. Extrusion of rounded corners, the natural R angle becomes smaller, and the inclined surface becomes flat, so that the round melon becomes a similar angular shape with rounded corners and concave surfaces. The gold parts processing manufacturer tells you that, then, use the cold forging die 3 to continue to extrude. The leading slope of the cold forging die 3 is convex in the middle and concave on both sides. Extrude in the direction of a rounded corner, the wire is completely filled with the cold forging die 3, and the similar corners with rounded corners and concave surfaces become sharp-angled standard corners. Finally, the corners are flattened again by the cold forging die 4 to form standard corner screws. . The gold parts processing manufacturer tells you that by changing the processing method of the product, the production of the golden horn screw greatly reduces the consumption of raw materials, increases the service life of the cold forging die, effectively reduces the production cost of the product, and achieves the purpose of saving raw materials. 

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894