Aluminum Double Spindle 1605 Rolled

After entering the program name, copy the program name on the screen with a pen, and then check it with the program list. When opening the program, pay attention to check whether the size of the knife diameter in the program is consistent with the program list, and sign the file name on the program form. The size of the knife diameter is prohibited from filling in afterwards or beforehand (to ensure the true effectiveness of the data); during the processing process, the speed and speed provided by the teacher can make a reasonable adjustment based on the actual situation of the operation. However, special attention should be paid to the speed of small copper workers. To avoid the loosening of the workpiece caused by the speed of the speed of the speed; 10. During the processing process of the workpiece, the NC technicians should check with the scatter diagram to see if there are abnormal situations. Personnel, whether there is an error in the check; 1 For the diameter of the diameter of the detection of the tool on the program, the operator must be carefully and responsible to check and record the diameter of the test. Make a knife; 1 The main reason for the waste of process errors is that semi -processed products are errors in order to use inappropriate knife processing, and there are errors in order. Empty knife road is too dense, too slow, etc.)

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894