Which materials for cnc parts processing can be electropolished

   When we are processing, we must understand clearly whether our materials can be processed, otherwise it will affect many aspects. CNC parts processing is one of them, so which materials can be processed by CNC parts Electrolytic polishing!

   In CNC parts processing, both carbon steel parts and stainless steel parts can be electrolytically polished, as well as aluminum alloy parts. Electrolytic polishing is anodic corrosion of metal parts under specific conditions; the surface quality of electrolytic polishing is good, and the solution is stable, and no harmful gas is generated. Compared with ordinary polishing and liquid polishing, the effect is much better; the workpiece will not rust.

   The following is an introduction to the materials used:

   1. The application range of electrolytic polishing of stainless steel is very wide. It can be widely used in the polishing treatment of a variety of 200, 300 and 400 series stainless steels, and is widely used in stainless steel products and industrial equipment industries;

   2. Electrolytic polishing of aluminum: part of aluminum in the 1000-7000 series;

   3. Copper electrolytic polishing: copper and copper alloy workpieces;

   4. Alloy electrolytic polishing: high-temperature alloy molybdenum, nickel-manganese alloy, nickel-based alloy;

   5. Low alloy steel electrolytic polishing: 4130, 41