What matters need to pay attention to the lubrication of the machining center

The use of the machining center provides a powerful help for the current machining progress.The lubrication system is very important because the machining center needs many parts to move.The smooth oil moves along the inner wall of the pipeline one after another, and the oil and gas is swallowed and sent to the spindle department and wire of the machining center. Bars and other parts that need to be slippery. The following is a brief introduction for everyone.

Similarities and differences between oil and gas slippage and oil mist slippage in vertical machining center

1. In the vertical machining center, select the part of the grease and the oily wheel that will cause abnormal fever.

2.Like the spindle, it needs a bearing with a high speed and a clean and closed position.

Along the way, we should also stabilize some details: in the future there are many types of greasy oil on the market, and the quality is uneven. We have to choose a greasy oil with less impurities and high purity. After the machine tool is applied for a period of time, it is necessary to stop the filter from washing regularly to avoid the filter from closing, and then the filter screen split under the effect of oil pressure takes effect.

Characteristics of the slippery system of vertical machining center

1. Environmental protection and no purification. Because there will be no oil pollution and mist spray, the surrounding environment is not purified

2. Precise oil supply. It can increase the control valve after all, and transfer the oil to the slippery points such as the main shaft and the screw according to different needs

3. There is no difficult result of atomizing high-viscosity greasy oil; suitable for any oil;

4. Automatic detection and monitoring. It can detect whether the greasy oil is abnormal or not. If the greasy oil is not good, it can alarm and stop to avoid abnormal equipment.

5.The rolling bearing which is especially suitable for the main shaft has certain atmospheric cooling consequences, which can reduce the operating temperature of the bearing and then extend the application life of the main shaft;

6. Small fuel consumption and frugal cost.