What kind of products are considered high-quality products?

Which quality of CNC machining center can be considered high quality? First of all, I think it should be "muscle stiff". Relatively, as a CNC machining center selected "coordination ability", you must solve the coordination ability, which means that it can solve other cars at all times, I must say that "stiffness" means that it is a consistent solution of quality Each product of the same model specification. For example, I think a hole with a diameter of 54 and a time tolerance of ±0.05, the CNC machining center is the first, and everything is normal to do the second time. It comes from a well-known brand, the third is able to meet the standard again, and the fourth is prejudiced.

Secondly, let me talk about the accuracy of the first two. I think the accuracy is not a problem in today's CNC machining centers. Whether it is a national personal service system or personal imported system software imported from overseas, μm precision is not a problem. General production and processing manufacturers can achieve "silk" or 0.01mm, which is good. Choose more expensive machinery and equipment. Therefore, accuracy is not the most important criterion for distinguishing the quality of machinery and equipment.

Many processing plants use CNC machining centers to produce flexible production lines to consider the requirements of new products. However, if such flexible pipes are built in the old open processing plant, there is no stable temperature and environmental humidity standard. The product complies with the regulations, conforms to the processing regulations, and reflects the rigidity of the equipment itself. It can be applied within a certain temperature range, and the products manufactured by CNC lathes can consider the processing technology regulations. This is also a very good solution. Regulations of the management center.

The third thing I want to say is "design idea" or customer experience. The CNC machining center is also a piece of equipment. If the device stops working, it will be repaired, but how to easily repair it?

I have few applications, but I find it very easy to apply. When you have to repair and replace parts, even if it is a screw, you will not feel that it is impossible to disassemble and assemble, not to mention that some parts that are easy to wear and consume are "three minutes". Many Chinese manufacturers often expect customers to express their opinions. I suggest that a CNC machining center is designed and conceived to be sold to others. The user commented that it is not very good here, change, not very good, change, the customer does not understand CNC lathes, I want to ask the manufacturer, but many manufacturers I don’t know, the CNC machining center is very well designed and manufactured. The unit manufactures it and then sells it to customers. The interior designer has never personally operated the CNC lathe he designed and conceived. He has never applied it. How to know when others will apply it? The design concept of CNC machining center that has not been honed with time is not a good design concept. On the way home, I hope I don’t have to mention this. After that, I intend to clearly raise this issue to the theme style, that is, "leak". Most of the production processes I have seen are wet production processes, and cutting oils are commonly used. It involves the problem of water seepage. Don't look at the leak as a minor issue, but I don't think there are many leaks of new beds. The staff who adjusted the new machinery and equipment said that their overall goal in 2020 is to avoid the leakage of new beds. Naturally, this may be a joke. The 5 sets of 5 CNC lathes purchased at that time often leaked, and all the equipment often had liquid removed from the equipment or problems afterwards. Solved a batch of cardboard to block it.