What is the choice of materials for automatic parts processing accessories

   In recent years, the development of industry is relatively acceptable. Why do you say that! Because there are many products around us that need to be processed before they can be used. The same is true for automated parts processing. So what is the choice of materials for automated parts processing accessories?

   (1) Automated parts processing. When designing the structural appearance of the parts, the appearance and combination of complex and reasonable structure should be adopted. At the same time, the number of processing surfaces and the processing area should be as small as possible.

   (2) Choose the method of blank preparation in reasonable machine manufacturing, which can indirectly apply profile, casting, forging, stamping and welding. The selection of the blank is related to the detailed production technical conditions, and generally depends on the production batch, data function and processing capability.

   (3) The requirements for the processing and forming functions of automated parts. In order to facilitate the improvement of stamping deformation and the quality of parts, the materials should have good plasticity, small yield ratio, large thickness directivity coefficient, small three-dimensional directivity coefficient, and data The ratio of yield strength to elastic modulus is small. The separation process does not require the data to have great plasticity, but the plastic data.

   (4) The manufacturing precision and surface roughness with proper rules. The cost of metal stamping parts will increase with the improvement of precision, especially under the condition of higher precision. Therefore, high accuracy should not be pursued when there is no sufficient basis. Similarly, the surface roughness of automated parts processing should also be based on appropriate rules to meet the practical needs of the appearance.