Tube Skin Temperature Sensor Water

Wire cutting machine tools are not suitable for working in dirty and high temperature and humid environments, and the power grid power supply environment also has high requirements. The power supply voltage of the machine tool should not be worse than ±10%, and the corresponding balance is stable. If the power grid of the wire cutting machine is too bad, a voltage regulator must be installed. In addition to the normal maintenance of cleanliness and lubrication, the wire cutting machine must also carefully maintain the following parts. For the guide wheel and bearing of the wire cutting machine, the too dirty coolant should also be replaced for the life of the guide wheel and bearing. The screw plug of the lower guide wheel seat is filled with grease, so that the dirt can be discharged through the oil gap, so that the guide wheel and the bearing are always in a clean state.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894