The technical characteristics of the red copper strip loose coil pressing device

Technical characteristics:

1. A device for loosening and pressing copper strips, comprising a loosening stand (1) and a loosening roller (2), characterized in that the bottom of the groove cavity of the loosening stand (1) is rotatably installed with a loose The winding roller (2), the top of the groove cavity of the unwinding stand (1) is provided with a guide pressure roller (3), and the guide pressure roller (3) is arranged above the rear side of the unwinding roller (2), so Both ends of the guide pressure roller (3) are respectively provided with integral structure roller shaft ends (30), and the roller shaft ends (30) are respectively connected to the lug plates on both sides of the lower U-shaped frame plate (4) in rotation, so The bottom U-shaped frame plate (4) is fixedly connected to the end of the two side ear plates of the upper U-shaped frame plate (5), and the two side ear plates of the upper U-shaped frame plate (5) are slidingly inserted and installed on the cross beam plate (6) ), the two side plate ends of the beam plate (6) are integrally assembled and connected to the loose roll stand (1), and the shaft end seat (7) is fixedly installed at the middle position of the top surface of the beam plate (6), so The shaft end seat (7) is rotatably connected to the bottom end of the adjusting shaft (8). The adjusting shaft (8) is provided with a threaded thread (80). The threaded thread (80) is connected to the upper end of the adjusting shaft (8). The frame plates (5) are threaded and connected, and a threaded sleeve (9) is fixedly installed at the middle position of the top surface of the upper U-shaped frame plate (5). The threaded sleeve (9) is connected with the threaded thread. (80) Threaded connection between each other. 2. A compacting device for loose-rolling copper strips according to claim 1, characterized in that: the top end of the adjusting shaft (8) is provided with an adjusting handle (10) of an integrated structure. 3. A compression device for loose coils of red copper strips according to claim 1, characterized in that: between the two side ear plates of the lower U-shaped frame plate (4) and the inner side wall of the loose coil frame (1) Sliding in phase conflicts with the setting. 4. A compacting device for loose coils of red copper strips according to claim 1, characterized in that: the lugs on both sides of the lower U-shaped frame plate (4) are provided with an integral structure of the shaft sleeves (11) , The shaft end (30) of the roller is connected to the shaft sleeve (11) in a rotatable fit. 5. A pressing device for loose coils of copper strip according to claim 1, characterized in that: the two sides of the guide pressing roller (3) are slidingly sleeved with limit rings (12) respectively. 6. A compression device for loose coils of red copper strip according to claim 5, characterized in that: the limit ring (12) is threadedly connected with a plurality of bolts (13), and the bolts (13) ) Conflicts with the guide roller (3) to lock the setting. 7. A compacting device for unwinding copper strip according to claim 1, characterized in that: the two ends of the unwinding roller (2) are rotatably connected with a bearing seat (14), and the bearing seat (14) It is fixedly installed on the loose roll stand (1).

Please contact us at zhang@pride-cnc.com