The Difference between a Reed and a Spiral Ring What's the Use of a Reed?

The difference between a reed and a helical ring:

There is a big difference between the two from the form factor:

1.the reed usually has two process holes for the clamps and holding, there are two distinct protrusion slots at the process hole;

2.Double-layer helix ring and key fob is very similar, except that in the end of the bezel wire left a cut angle for holding. Due to the addition of process holes, the reed is more convenient to disassemble, but the opening of the installation process hole occupies a larger space, whether it is used for holes or shaft with the card reed has a large space.

3.relative to the reed, spiral ring no process hole, removal is not as convenient as the card reed, but the spiral ring occupies less installation space, the shape is more simple, beautiful. The advantages of the spiral ring are even more obvious when there is no need for frequent removal.

What's the use of a reed?

The reed is an important part, belongs to a small equipment parts, specifications are generally very small, but consumers should not look down on such a small shape, it has a role to be reckoned with. The shape of the clarinet is usually round, but there is a gap at one end. The reed set on the need to fix the equipment, and then with screws to lock the gap, can make the equipment stable, this is the role of the reed. There is also a reed, which is shaped like a spring, has a certain stretch, and also enables the object to maintain a stable working state.

The classification of the card reed in life is mainly based on the material of the card reed as the standard, commonly used are stainless steel reed, aluminum alloy reed, iron reed and so on. In addition to the classification according to the material, the reed also has the size and specification of the distinction, different materials and specifications of the reed has its own unique role.