Technical realization elements of turbine with air cooling and dehumidification structure

4. The utility model proposes a turbine with an air-cooled and dehumidifying structure, which solves the problem of frequent low insulation or low insulation of the turbine due to high body temperature and high air humidity when the existing turbine is used. The problem of ground faults.

5. In order to achieve the above purpose, the present utility model adopts the following technical solutions:

6. A turbine with an air-cooling and dehumidifying structure, comprising an air inlet pipe and a chassis, one end of the air inlet pipe is connected with a filter tube, and one end of the air inlet pipe close to the filter tube is sleeved with the first method A second flange is sleeved on one end of the filter tube close to the air inlet pipe, and the second flange is matched with the first flange. Symmetrically arranged drainage holes are opened on both sides of the drying box. A dehumidification device is installed in the drying box. An air-cooled tube is connected to the side of the drying box away from the filter tube. The air-cooled pipe is connected to a chassis at one end away from the drying box, and the cross-section of the air-cooled pipe gradually decreases along the direction from the drying box to the chassis. An air outlet pipe is connected, and the air outlet pipe is arranged in a through arrangement with the chassis, and an end of the air outlet tube away from the chassis is sleeved with a ventilation box.

7. Preferably, a mesh pad is installed at the connection between the air inlet pipe and the filter pipe.

8. Preferably, a box cover is installed at the top of the drying box.

9. Preferably, the dehumidification device includes a limit plate, a limit groove, a heat exchange fin, and a drainage groove, two symmetrical limit plates are installed in the drying box, and the top of the limit plate is provided with The limiting grooves are arranged in an array, and heat exchange fins are installed in the limiting grooves, and drainage grooves are arranged on the top of the limiting grooves, and the drainage grooves are matched with the drainage holes.

10. Preferably, an exhaust fan is fixedly installed in the ventilation box.

11. The beneficial effects of this utility model are:

12.1. Through the linkage installation of the filter screen and the dehumidification device, the impurities of the airflow entering the air inlet pipe are removed, and the impurity particles are prevented from damaging the turbine. The heat exchange fins dehumidify and dry the airflow, which effectively avoids airflow carrying The moisture in the turbine will cause corrosion or short-circuit insulation and other faults to the turbine.

13.2. Through the linkage installation of the exhaust fan and the air-cooled pipe, the flow rate of the gas in the equipment is accelerated, and when the airflow passes through the air-cooled pipe, the flow rate increases and the temperature decreases, effectively bringing out the ineffective heat in the turbine , Extend the service life of the turbine.

14. In summary, the present utility model not only dehumidifies and dries the gas flow, but also cools the gas flow, which solves the problem of high body temperature and high air humidity when the existing turbine is used. Frequent problems of low insulation or grounding faults are suitable for promotion.

Please contact us at zhang@pride-cnc.com