Stainless Steel Precision Cnc Thin

According to the distance of the processing part relative to the tool setting point, in general, the part close to the tool setting point is processed first, and the part far from the tool setting point is processed later, so as to shorten the tool moving distance and reduce the idle stroke. For turning, it is also beneficial to maintain the rigidity of the blank or semi-finished product and improve its cutting conditions. For the machining of parts with both plane milling and boring, it can be carried out in the order of first milling the plane and then boring. Because the cutting force is large when milling the plane, the parts are prone to deformation. First, the surface is milled and then the hole is boring, so that it can be partially restored. After the deformation is restored, the boring is beneficial to ensure the machining accuracy of the hole. If the plane is flat, the orifice will produce burrs, which will affect the assembly of the hole.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894