Stainless Steel Micro Bending Tube

The solution of no response when the laser cutting machine is turned on The laser cutting machine does not have any reflection when it is turned on. This problem is caused by the power output and input, which can be solved by checking the power; power failure is usually caused by the fuse burnt or the power Switch problem, which requires better high-quality power supply fuse to control the switch. Repair the circuit, check whether the power supply is caused by factors. Check for broken cables or joints. For this problem, firstly check the operation of the machine and equipment. After confirming the case, there is an electrician's help. If you still can't solve it, you should ask professional maintenance personnel to help with maintenance and troubleshooting.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894