Spacer Iron Floor Flange Spectacle

For the tool measurement error in machining, the tool setting data input does not consider the tool setting bar; the tool installation is too short; the tool measurement should use scientific methods, and use more accurate instruments as much as possible; the installation length is longer than the actual depth The 25mm program number is called incorrectly or the program has been modified, but the old program is still used for processing; the CNC processor of on-site machining of aluminum shell must check the detailed data of the program before machining, such as program writing and date, and simulate it with the bear family. Tool error, the blank exceeds expectations, the blank is too large and does not match the blank set in the program, the workpiece material itself is defective or the hardness is too high, the clamping factor, the spacer interferes and the machine failure is not considered in the program, sudden power failure, and lightning strikes cause the tool to collide Wait for some accidents. Our operators must pay attention to the above events before operation, and try to avoid the occurrence of these events. As a high-precision machine tool, it is very necessary to avoid collision. The correct way to operate the machine tool can reduce the occurrence of machine tool collision. With the development of technology, advanced technologies such as tool damage detection, machine tool anti-collision detection, machine tool adaptive processing, etc. have emerged during processing. Operators must be detailed when processing mechanical parts. Understanding these key contents above can better protect CNC machine tools.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894