Road Bicycle Hexagon Polished

1 The tool setting point can be set on the part to be processed, but note that the tool setting point must be the reference position or the finished part. Sometimes the tool setting point is damaged after the first process, which will lead to the first process and later. There is no way to find the tool setting point, so when setting the tool in the first process, pay attention to setting up a relative tool setting position where there is a relative fixed dimensional relationship with the positioning reference, so that the original tool setting can be retrieved according to the relative positional relationship between them. point. This relative tool setting position is usually set on the machine table or fixture. The selection principle is as follows. 2. The origin position of the workpiece coordinate system is set by the operator itself. It is determined by tool setting after the workpiece is clamped. It reflects the distance and position relationship between the workpiece and the zero point of the machine tool.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894