Quality Temperature Sensor Tube On A

When programming the tool path, the tool can be lowered at the specified arbitrary height and orientation. When the first tool starts processing, the amount of cutting is often relatively large, which is easy to cause the tool to break. At this time, the lower tool position can be roughened or the second layer Cut the knife and take the empty knife, try to cut the knife outside the material, this problem must be paid attention to. The square meter parts with the same corner radius and tool radius are prone to inaccurate external dimensions during processing. It is called grabbing a knife. You can use a knife with a small diameter to clear the corner in layers, and then replace the large knife for side treatment. When the degree of deep processing plastic mold is low, it can be processed in layers.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894