Precautions for the Use of the Hammer

1. confirm that the field of power and the hammer nameplate is consistent. Whether there is a leakage protector.

2. drill bit and gripper should be suitable, and properly installed.

3. drilling walls, ceilings, floors, should first confirm whether there are buried cables or pipes.

4. in high places, to pay full attention to the following objects and pedestrian safety, if necessary, set a warning sign.

5. confirm whether the power hammer on the switch is cut off, if the power switch is on, the plug into the power outlet when the power tool will unexpectedly turn immediately, which may lead to the risk of personal injury.

6. if the work site away from the location of the power supply, the need to extend the cable, should use enough capacity, install qualified extension cable. Extension cables should be elevated or taken to prevent damage from crushing the cables if they pass through the pedestrian aisles.

Personal protection when using an electric hammer:

1. operators should wear protective glasses to protect the eyes, when the face is facing up, to wear a protective mask.

2. long-term operation when the fort stoic earbuds, to reduce the impact of noise.

3. long-term operation after the drill bit in a burning state, in the replacement should pay attention to burning skin.

4. work should use side handle, hands operation, to block the reaction force sprained the arm.

5. standing on the ladder work or high work should do a good job of high fall measures, ladders should be supported by ground personnel.