Phone Temperature Sensor Zebra Pipe Adapter

In the production process of sheet metal processing, not only should the quality and function of the equipment be considered stable, but also the safety protection should be improved according to the special application fields and working conditions of the product, especially in the processing of cabinets, because the internal A large number of cables and some electronic equipment are often placed, so it is easy to suffer economic losses due to lightning strikes in thunderstorms. So how to solve the lightning protection problem of the cabinet? For the lightning protection problem of the cabinet, the solution is usually to install the corresponding cable for the cabinet. The lightning arrester, which can prevent the further damage caused by the intrusion of the circuit along the circuit into the room when the lightning strikes the cabinet. Huazhen's sheet metal processing reminds that when placing the cabinet, pay attention to at least 0.5 meters away from the wall and away from doors and windows. If the distance is too close, it is easy to penetrate the wall and invade the room when struck by lightning, which is very harmful. The wiring of no other lines is laid together with the wiring of the network chassis cabinet, and it is isolated as much as possible, which can reduce the damage caused by lightning strikes. Grounding is the most commonly used lightning protection measure. However, when grounding, it should be noted that the grounding resistance must be less than 4Ω. In addition, measures such as equipotentiality should be taken on the sheet metal shell, so as to maximize the improvement of thunderstorms. Safety for use in weather.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894