Blog

4 Axis Black Anodized CNC Machining Turning Aluminum Parts

For forgings that are no longer machined, the maximum depth of the refurbished part must not exceed the lower deviation of the size, and the refurbish

view more

6061t6 Aluminum Punching Fine Blanking Metal Panels

When the depth of the surface defect of the wheel forging exceeds the machining allowance, the user's consent must be obtained if repair welding i

view more

CNC Machining Aluminum Anodized Medical Endoscope Parts

Whether the surface of the wheel forgings should be cleaned and the cleaning method shall be agreed between the user and the manufacturer at the time

view more

Sheet Metal Plate CNC Aluminum Milling Parts

Let's take a look today about measures to reduce and prevent the formation of oxide scale. For the flame heating furnace, according to the heating

view more

CNC Alloy Motorcycle Bike Handle Bar Part

Fast heating. On the premise of ensuring the quality of wheel forgings, try to use rapid heating to shorten the heating time, especially to shorten th

view more

CNC Anodized Aluminium 5-Axis Metal

Control the nature of the heating furnace gas. Under the conditions of complete combustion, strictly control the amount of air entering the furnace, a

view more

CNC Anodized Aluminium Lathe Parts

Reduce the moisture in the fuel and reduce the oxidation effect of water vapor on the metal surface. The furnace should maintain a small positive pres

view more

Aluminum Ring Black Anodized Aluminum Parts Machining

Medium protection heating. Isolate the surface of the billet from the oxidizing furnace gas to prevent the billet from oxidizing when heated. The medi

view more

CNC Machining Service Anodized Black Precision

Let's learn more about the hazards of oxide skin. Oxide scale will cause a large amount of loss of metal materials: The oxide scale produced when

view more

CNC Processing Sand Blast And Anodized Aluminum

Affect the surface quality of wheel forgings: If the oxide scale on the blank is not cleaned up during die forging, once the wheel forgings are presse

view more

Record Weight Anodized CNC Machining Aluminum Parts

Reduce the service life of the mold: due to the high hardness of the oxide scale, the oxide scale in the mold cavity will accelerate the wear of the m

view more

Anodized Aluminum Corner Connector CNC Machining Parts

Therefore, it is very important to reduce and prevent metal oxidation. It can not only improve the quality of wheel forgings and the service life of m

view more