Blog

In ensuring the rigidity of transmission Under the premise

In ensuring the rigidity of transmission Under the premise of reducing the mass m of the moving part, this is a method often used in our actual work.

view more

Reducing the output gear radius R will affect the machine tool's fast forward...

Reducing the output gear radius R will affect the machine tool's fast forward speed. You need to go back and recheck the fast forward speed and to

view more

You need to go back and recheck the fast forward speed according to (Nmax/i)×...

You need to go back and recheck the fast forward speed according to (Nmax/i)×(πD/1 000)=v to ensure that the fast forward speed also meets the require

view more

Reselect the motor

Reduce the tooth width B of the output gear, the actual effect is not obvious, so it is not recommended. Reselect the motor. This method is the simple

view more

It will only be used if none of the other methods work

It will only be used if none of the other methods work. Reducing the moment of inertia J minus of the reducer is theoretically effective, but compared

view more

the torque matching of the servo motor and the inertia matching of the servo ...

Conclusion The above uses the form of examples to systematically introduce the calculation process and calculation method of the rack and pinion trans

view more

Hope to provide useful reference and help for readers.

Corresponding adjustment methods and adjustment techniques when the preselection does not match. Hope to provide useful reference and help for readers

view more

Other screws can be disassembled

Other screws can be disassembled, can be used on the object the best screw may be screw, screw screw is with tooth print. Self-tapping screw is direct

view more

So if you want to split the components, you just need to screw out

screws are threaded into the body of the component to bridge the part. So if you want to split the components, you just need to screw out, and the scr

view more

Rivets are toothless and use the head of the rod to stop the object from slip...

There are rivets selected time to see whether this object is opennext, whether it can be used second time, because rivets for a while is riveted dead,

view more

Some cooks believe the stainless steel soap bar works better than traditional...

Some cooks believe the stainless steel soap bar works better than traditional soap for more stubborn odors, but it is difficult to evaluate such claim

view more

latex gloves can be worn when working with odor-causing foods

Because there is very little scientific evidence to support any of these claims, some experts suggest there is no real benefit to using a stainless st

view more